• Product
    GQ Series Rebar Cutting Machine
    Product name:GQ60 Rebar Cutting Machine
    Scope of application:
    Product details

    Product Introduction

    GQ60 rebar cutting machine is an ideal equipment for cutting. It can be applied to cut the normal carbon steel rod, hot rolled steel and deformed bar in machine processing and construction projects, also suit for square steel and flat steel.

    Main Features

    1.Enhanced machine rack, small volume, compact structure, solid and reliable.

    2.Good lubricating property, adopt enclosed gear box, use the gear splashing to realize lubrication. It could be continuous work two months after adding 8kg gear oil.

    3.Less loss because of the lubrication improvement. The gear section adopts rolling bearing, less resistance. Compared with same type of cutting machine, load power can be reduced by one third.

    4.Using high rigid cutting head, connecting rod and high speed national standard motor, guaranteed a more stable quality and longer service life.

    Main Technical Parameters

    Model:GQ60 Rebar Cutting Machine
    Voltage:3-380V  50Hz
    Motor Speed:2880r/min
    Motor Power:9.0Kw
    Punching Frequency:27times/min
    Cutting Nominal Stroke:42mm
    Cutting Range:
    Common Carbon Steel≤Φ60mm
    GradeⅡDeformed Bar≤Φ50mm
    Max Flat Steel: 100*25mm
    Max Square Steel: 50*50mm
    Max Angle Steel: 75*75mm

    Warm Note

    In order to prolong service life of the equipment and reduce the cost, please read the instruction manual carefully before operation and maintain the equipment according to signs. Change the OEM gear oil after the first use of 500 hours, then add the same grade gear oil.

     COPYRIGHT (©) 2018 Baoding Jindi Machinery Co., Ltd    www.chinaapp.cc